Guide to Manage the E-waste Environment with Greentek Reman
In 2016, joint research by ASSOCHAM-NEC revealed that a mere 20% (8.9 tons) of the entire amount of electronic garbage generated in India was correctly collected and recycled. And leaving no evidence of the remaining electronic waste. As computer hardware makes up almost 70% of the e-waste stream, effective management is critically needed.
The other three categories of equipment were electrical (8%), medical (7%), and telecommunications (12%), with the remaining 4% unaccounted for. Out of all the states in India, Maharashtra ranked as the top producer with 19 MT (Million Tons) of e-waste. The Indian government has imposed strict E-Waste Management Rules to control appropriate disposal and recycling in response to this growing environmental concern.
This article examines the seriousness of e-waste in India, the state of the law, and the crucial part that GreenTek Reman plays in providing a complete solution for e-waste collection in Noida.
E-Waste Recycling in India
According to the Report, Inadequate infrastructure, laws, and regulations are the root causes of India’s subpar e-waste disposal.
Only over 22% of e-waste gets recycled in India, despite the country having more than 160 e-waste processing units. Karnataka has the most recycling facilities among the states, followed by Maharashtra and Uttar Pradesh.
The nation needs more recycling facilities given the quantity of e-waste produced in India and the number of e-waste recycling facilities already in place. To process 86,130 tons of e-waste, for instance, Uttar Pradesh, a significant provider of e-waste, has only 22 units. This unit is not even half of the e-waste generated by the state.
Maharashtra has 32 facilities that can recycle 47,810 tons of the 3.96 lakh e-waste. Whereas Karnataka has 57 facilities that can handle approximately 44,620 tons of e-waste of the entire 1.78 lakh (25%) amount of e-waste.
Read More : What is ITAD, and what are the benefits of using it?
E-Waste Management Rules in India
According to the E-Waste (Management) Rules, 2016, which went into effect on October 1, 2016, State Pollution Control Board approval is required for units that are dismantled and recycled. The Ministry of Electronics and Information Technology supports CPCB guidelines and SPCB oversight that aims to modernize the recycling sector.
The 2016 guidelines are replaced by the E-Waste (Management) guidelines, 2022, which go into effect on April 1, 2023. Under the new Extended Producer Responsibility (EPR) regulations, producers, refurbishes, dismantlers, and recyclers must register via a site created by the CPCB. It is forbidden for unregistered businesses to conduct business.
Under the EPR system, 106 items of Electronic and Electrical Equipment (EEE) are covered. Producers must meet yearly recycling goals that increase from 60% in 2023–2024 to 80% in 2027–2028. Since the regulations now cover solar PV modules, panels, and cells, the amount of recycled material is calculated based on the final products. The creation of EPR certificates and the inclusion of clauses pertaining to environmental compensation, auditing and verification, and steering committees are presented.
The E-Waste Management Rules place a strong emphasis on limiting lead, mercury, and other hazardous materials in the manufacturing of EEE. For people engaged in the disassembly and recycling of e-waste, procedures for worker safety, skill development, and recognition are included. This information was given by Minister Ashwini Kumar Choubey in a written response to the Rajya Sabha.
The Best Practices to Manage e-waste management
- Reduction
Reducing the generation of e-waste is the first step in an efficient management strategy. This is accomplished by giving maintenance and updating of current gadgets a higher priority than buying new ones, and by properly disposing of outdated devices.
- Collection
A key component of effective e-waste management is organized collection programs, which are run by local groups, manufacturers, or government agencies. By guaranteeing the proper disposal of e-waste, these initiatives encourage the recovery and repurposing of priceless materials.
- Recycling
After being gathered, e-waste needs to be properly recycled to handle hazardous materials and recover valuable resources. Recycling is a sustainable option that helps protect the environment.
- Appropriate Disposal
Since landfilling and incineration emit hazardous chemicals, it is essential to avoid these processes when disposing of e-waste. Rather, the focus should be on repurposing and recycling e-waste or making use of facilities that are specifically designed for processing materials safely.
- Regulation
Government rules are essential for managing e-waste because they set standards and provide means of enforcement. Reverse logistics services Noida and other areas help to ensure proper management and disposal of e-waste, which is a sustainable and environmentally friendly practice.
Read More : What Are ITAD Services & Why Should Businesses Use Them?
GreenTek Reman- The One- Stop Destination for your E-Waste Collection Centres in Noida
GreenTek Reman becomes a significant player in the management of an e-waste collection center in Noida. Their well-placed e-waste and reverse logistics services Noida facilitate residential and commercial disposal, reflecting their dedication to ethical recycling in compliance with E-Waste Management Rules. GreenTek Reman stands out as a reliable partner in the transition to a greener environment.
GreenTek Reman offers specialized services that are specifically designed to meet the demands of individuals looking for trustworthy digital waste management in Delhi. Because of its experience, the organization can guarantee that the disposal of electronic trash meets all environmental requirements and official norms. GreenTek Reman, which specializes in digital waste management in Delhi, is the preferred option for environmentally conscientious people and companies in the area because they represent the best in e-waste solutions.
